Used Machinery

LOOPCO “SWINGER” SLITTING LINE

(60” x 0.250

Specifications

  • Make: Loopco
  • Material Gauge: .024" - .250"
  • Maximum Strip Width: 60"
  • Maximum Weight: 50,000Lbs
  • Coil ID: 20" - 24"
  • Coil OD: 72"
  • Line Speed: 0 -- 525fpm
  • Line Direction: Left to Right
  • Entry L-Type Coil Car
  • Floor Standing Design
  • Hydraulic Lift
  • Mechanical Traverse
  • Self-Contained Hydraulics
  • Mandrel Uncoiler
  • 4-Leaf Mandrel Design
  • Sliding Base
  • Water Cooled Brake
  • Powered Mandrel Expansion
  • Powered Hold-Down Roll
  • AC Feed-Up Motor
  • Hydraulic Peeling Table
  • Driven Pinch Rolls
  • Adjustable Edge Guides
  • Slitting Head
  • Swinger Head Design
  • Arbor Diameter: 9"
  • Arbor Width: 67"
  • Powered Arbor Adjustment
  • Adjustable Outboard Housing
  • 30HP Motor Drive
  • Two (2) Scrap Winders
  • Mechanical Design
  • Automatic Dumping
  • Powered Open / Close
  • Pit Cross Over Table
  • Drag Board Tension Stand
  • Pneumatic Activated Pads
  • Automatic Open/Close
  • Strip Separation Bar
  • Recoiler
  • Hydraulic Grip
  • Powered Push-Off
  • Powered Over-Arm Separator
  • Motor: 125HP DC 550/1950 RPM
  • Entry L-Type Coil Car
  • Hydraulic Lift
  • Mechanical Traverse
  • Self-Contained Hydraulics
  • Complete Slitting Line with Electrics, Hydraulics, Controls, Tooling & Knives, Installed

Request a Quote

Schloemann hydraulic closed die forging press

(10,000 Ton)

Specifications

  • Power: 4550 / 9100 tons
  • Operating Pressure: 200 / 400 atms.
  • Maximum Fill Tank Pressure: ~ 10 atms.
  • Maximum Press Stroke: 1000mm
  • Lowering Speed of Top Tools: ~200 mm/sec
  • Forging Speed: ~100mm/sec
  • Maximum Opening: 2500mm

Request a Quote

Sendzimir Z-Mill 22 Hi AGC, 1750hp

(1960)

Specifications

  • TYPE: 22-Hi Sendzimir Cold Rolling Mill
  • WIDTH: 56"
  • AGE : 1960 updated with new automated AGC control 1995
  • WR ROLLS : 2.125" diameter
  • INTERMED. ROLLS : 4" diameter
  • DRIVE ROLLS: 6.812" diameter
  • SADDLE ROLLS: 11.811" diameter
  • THICKNESS: .014" to .200"
  • MAIN MOTOR : 1750 Hp
  • SCREW DOWNS: AGC
  • SPEED : 710 fpm
  • COIL SIZE: 24" ID x 80" OD x 40,000#
  • REELS: Two tension reels - 1400 hp each
  • TENSION: 6000# To 81,000#
  • EQUIPMENT:
  • Entry in-ground coil car
  • Pay off reel
  • Two tension reels -dual motor driven for each
  • Two in-ground coil cars
  • Strip side guides, wipers, etc.
  • Hydraulic system
  • Control system
  • Cooling system
  • Rolls chocks and bearings
  • CONDITION: good

Request a Quote

HERR VOSS SLITTING LINE

56” x 40,000 LBS. x 7”

Specifications

  • 56" x 7" x 40,000# Herr Voss slitting line
  • Ref. # 4214
  • MAKE: Herr-Voss
  • YEAR: 1975
  • SIZE: 56" x 7" x 40,000#
  • STYLE: driven head loop type
  • COIL SIZE: 20" to 24" ID x 72" OD
  • GAUGE: .025" to .105" (previous use)
  • TRAVEL: right to left
  • SPEED: 400 FPM
  • ENTRY COIL CAR: in-ground type
  • UNCOILER: 40,000# expanding mandrel, 20"-24" ID, hold down arm, 200 hp drag generator
  • ENTRY: Powered pinch rolls 10 hp, roller side guides
  • SHEARS: entry and exit shears, hydraulic
  • SLITTER: Two drop in heads, 60 hp drive, 7" diameter arbors
  • LOOPING PIT: cascade rolls
  • TENSION STAND: roll type 75 hp
  • RECOILER: Expanding mandrel type , over arm separator, push off, 18" to 24" ID, 200 hp
  • EXIT COIL CAR: in-ground type
  • CONTROL; digital slitter drive
  • TOOLING: yes
  • CONDITION: Good - still installed

Request a Quote

Stamco loop type slitting line

58" x 7" x 48,000#

Specifications

  • MAKE: Stamco
  • YEAR: 1982
  • SIZE: 58" x 7-1/2" x 40,000#
  • STYLE: driven head loop type
  • COIL SIZE: 20" to 24" ID x 72" OD
  • GAUGE: .065" to .250" (previous use)
  • TRAVEL: right to left
  • SPEED: 300 FPM
  • ENTRY COIL CAR: in-ground type
  • UNCOILER: 40,000# expanding mandrel, 20"-24" ID, hold down arm, 250 hp drag generator
  • ENTRY: Powered pinch rolls, flatener, roller side guides
  • SHEARS: entry and exit shears, hydraulic
  • SLITTER: Two drop in heads, 150hp drive, 7-1/2" diameter arbors
  • LOOPING PIT: cascade rolls
  • TENSION STAND: roll type with Witchita air brakes
  • RECOILER: Expanding mandrel type , over arm separator, push off, 16" to 24" ID, 250hp
  • EXIT COIL CAR: in-ground type
  • CONTROL; digital slitter drive
  • TOOLING: yes
  • CONDITION: Good - still installed

Request a Quote

60″ X .250″ X 40,000 LBS. HERR VOSS CUT-TO-LENGTH LINE

Specifications

  • 60" x .250" Herr Voss CUT-T0-LENGTH LINE with (2) 6-Hi levelers 3-1/2" & 1.75" diameter
  • TYPE: Cut to Length Line with Two 6-Hi Precision Levelers
  • SIZE: 60” wide x .250” thick x 40,000# coil weight
  • MFG: Herr Voss
  • AGE: 1985
  • ELECTRICS: 480/3/60 AC
  • SHEET LENGTH: 3' to 33' long
  • COIL SIZE: 20” to 24” ID x 72” OD
  • TRAVEL: right to left
  • SPEED: 150 FPM
  • COIL CAR: Inground powered coil car with coil skids
  • UNCOILER: Expanding mandrel, DC motor drag generator
  • PEELER: Hydraulic powered peeler, up/down & in/out
  • HEAVY LEVELER: 72" wide 3.5" diameter 6-Hi 17 roll Voss
  • LIGHT LEVELER: 66" wide 1.75" diameter, 6-Hi 19 roll Voss
  • SIDE GUIDES: Roller type, motorized adjustment
  • SHEAR: Mechanical, double rake, hydraulic adj, measuring rolls
  • STACKER: Auto drop, 20,000# cap. motorized sheet cart, 3 conveyors, roll type piler
  • TOTAL LENGTH:
  • CONDITION: Good, PLC digital controls, marking system, etc.

Request a Quote

20,000t Kolomna Model D0053

(Russian Built)

Specifications

  • Capacity: 20000
  • Working fluid pressure - 125-250kg/cm2
  • Piston stroke, max - 700mm
  • Piston travel speed:
    • - idle travel - 0.05-0.3mm/sec
    • - reverse travel - 6mm/sec;
  • Max distance between table and press ram - 1900mm
  • Moving table size - 1940mm x 3900mm
  • Press dimensions:
    • - length - 5600mm
    • - width - 6000mm
  • - height above floor level - 6125mm
  • - total height - 11635mm
  • Press weight - 1,090t

Request a Quote