1,600 Ton Smeral Hot Mechanical Forging Press
Built in Czech Republic
The press itself has the latest rigid Shmeral design the following design features:
- press frame is one-piece monoblock castings
- both parts of the press frame are connected by four tie rods made from forged bars
- the eccentric shaft is located from the front to the back of the press
- the shut height adjustment is located in the ram; it is manual
- the ram has extra-long guides allowing for increased product quality
- the flywheel of the press has the mechanical overload protection with friction liners and Bellville springs.
Specifications
Nominal force | 1,600 metric tons |
Slide stroke | 280mm |
Number of continuous strokes per min | 85 |
Maximum numer of single strokes per min | 35 |
Shut height - slide down, adjustment up | 760mm |
Shut height adjustment | 10mm |
Table dimensions LR x FB | 1,180mm x 1,120mm |
Slide dimensions LR x FB | 1,000mm x 920mm |
Maximum stroke of lower ejector | 60mm |
Maximum stroke of upper ejector | 45mm |
Main motor power | 75kWt |
Press total weight | 85,000kg |