Specifications

• Entry 4-Arm Turnstile
• Powered Rotation

• Entry Coil Car
• L-Type Floor Standing Design
• Hydraulic Lift & Traverse
• Self - Contained Hydraulics

• Mandrel Uncoiler
• 4-Leaf Mandrel Design
• Powered Hold-Down Roll
• wered Mandrel Expansion
• Sliding Base
• Water Cooled Brake

• Hydraulic Peeler
• Adjustable Edge Guides
• Mechanical Entry Crop Shear

• Slitting Head
• Quick Change Turret Set-Up
• Arbor Diameter: 9"
• Shimless Tooling Sets
• Powered Mandrel Adjustment
• Motor: 250HP GE 850/2200 RPM

• Two (2) Scrap Winders
• Under Pit Table Placement
• Powered Open / Close
• In & Out Scrap Container

• Pit Cross Over Table
Cascade Entry & Exit Rolls

• Rotary Type Tension Stand
• Coated Tension Rolls
• Air Cooled Brake
• DC Motor Drive
• Strip Separating Bar
• Mechanical Exit Crop Shear

• Recoiler
• Powered Gripper
• Hydraulic Coil Push-Off
• Powered Over-Arm Separator
• Motor: 250HP GE 850/2200 RPM

• Exit Coil Car
• L-Type Type Floor Standing Design
• Hydraulic Lift & Traverse
• Self-Contained Hydraulics

• 2-Arm Exit Turnstile
• Powered Arm Rotation
• Powered Coil Push-Off

Complete Slitting Line with Electrics, Hydraulics, Controls, Shimless Tooling, Drawings & Manuals

Specifications

• Make: Loopco
• Material Gauge: .024" - .250"
• Maximum Strip Width: 60"
• Maximum Weight: 50,000Lbs
• Coil ID: 20" - 24"
• Coil OD: 72"
• Line Speed: 0 -- 525fpm
• Line Direction: Left to Right
• Entry L-Type Coil Car
• Floor Standing Design
• Hydraulic Lift
• Mechanical Traverse
• Self-Contained Hydraulics
• Mandrel Uncoiler
• 4-Leaf Mandrel Design
• Sliding Base
• Water Cooled Brake
• Powered Mandrel Expansion
• Powered Hold-Down Roll
• AC Feed-Up Motor
• Hydraulic Peeling Table
• Driven Pinch Rolls
• Adjustable Edge Guides
• Slitting Head
• Swinger Head Design
• Arbor Diameter: 9"
• Arbor Width: 67"
• Powered Arbor Adjustment
• Adjustable Outboard Housing
• 30HP Motor Drive
• Two (2) Scrap Winders
• Mechanical Design
• Automatic Dumping
• Powered Open / Close
• Pit Cross Over Table
• Drag Board Tension Stand
• Pneumatic Activated Pads
• Automatic Open/Close
• Strip Separation Bar
• Recoiler
• Hydraulic Grip
• Powered Push-Off
• Powered Over-Arm Separator
• Motor: 125HP DC 550/1950 RPM
• Entry L-Type Coil Car
• Hydraulic Lift
• Mechanical Traverse
• Self-Contained Hydraulics
• Complete Slitting Line with Electrics, Hydraulics, Controls, Tooling & Knives, Installed

Specifications

• 56" x 7" x 40,000# Herr Voss slitting line
• Ref. # 4214
• MAKE: Herr-Voss
• YEAR: 1975
• SIZE: 56" x 7" x 40,000#
• STYLE: driven head loop type
• COIL SIZE: 20" to 24" ID x 72" OD
• GAUGE: .025" to .105" (previous use)
• TRAVEL: right to left
• SPEED: 400 FPM
• ENTRY COIL CAR: in-ground type
• UNCOILER: 40,000# expanding mandrel, 20"-24" ID, hold down arm, 200 hp drag generator
• ENTRY: Powered pinch rolls 10 hp, roller side guides
• SHEARS: entry and exit shears, hydraulic
• SLITTER: Two drop in heads, 60 hp drive, 7" diameter arbors
• LOOPING PIT: cascade rolls
• TENSION STAND: roll type 75 hp
• RECOILER: Expanding mandrel type , over arm separator, push off, 18" to 24" ID, 200 hp
• EXIT COIL CAR: in-ground type
• CONTROL; digital slitter drive
• TOOLING: yes
• CONDITION: Good - still installed

Specifications

• MAKE: Stamco
• YEAR: 1982
• SIZE: 58" x 7-1/2" x 40,000#
• STYLE: driven head loop type
• COIL SIZE: 20" to 24" ID x 72" OD
• GAUGE: .065" to .250" (previous use)
• TRAVEL: right to left
• SPEED: 300 FPM
• ENTRY COIL CAR: in-ground type
• UNCOILER: 40,000# expanding mandrel, 20"-24" ID, hold down arm, 250 hp drag generator
• ENTRY: Powered pinch rolls, flatener, roller side guides
• SHEARS: entry and exit shears, hydraulic
• SLITTER: Two drop in heads, 150hp drive, 7-1/2" diameter arbors
• LOOPING PIT: cascade rolls
• TENSION STAND: roll type with Witchita air brakes
• RECOILER: Expanding mandrel type , over arm separator, push off, 16" to 24" ID, 250hp
• EXIT COIL CAR: in-ground type
• CONTROL; digital slitter drive
• TOOLING: yes
• CONDITION: Good - still installed